Full Tear-Out And Haul-Away
We remove the old shower door, tile, backer board, pan, and drain, then haul everything to the dump. Drop cloths go down first, and we protect the rest of the bathroom floor while we work.
Licensed local crew, clean tear-out, code-correct waterproofing
Walk-In Shower Replacement pocatello ID done right the first time
When your old shower pan cracks or the tile starts letting water into the wall, a walk-in shower replacement pocatello ID homeowners can count on means a dry floor and a shower that drains right. We handle the tear-out, plumbing, waterproofing, and new base for houses across Bannock County. Most jobs finish in two to four days, and we leave the bathroom cleaner than we found it.
Careful work. Honest options.
About this service
What Walk-In Shower Replacement pocatello ID Really Involves
Walk-in shower replacement pocatello ID is the full tear-out and rebuild of an existing shower - old pan, walls, valve, and drain come out, and a new waterproofed assembly goes in. We cut the old base free, check the subfloor for rot, and set a new shower pan liner or pre-sloped base. Cement backer board and a waterproofing membrane go up before any tile. A licensed plumber swaps the shower valve while the wall is open, because doing it later means tearing out new tile.
Most Pocatello homes we open up were built between the 1950s and 1980s, and the original pans are long past their service life. A cracked shower pan or failed caulking and grout lets water seep into the framing for months before you see a stain on the ceiling below. If you're searching for shower replacement near me pocatello because the floor flexes underfoot or the drain backs up, that's usually a sign the pan has already failed. We fix the cause, not just the surface.
- ✓ No More Hidden Leaks
- ✓ Lower Water Bills
- ✓ Easier To Clean
- ✓ Safer To Step Into
What's included
What Our Walk-In Shower Replacement Includes
Every replacement we do covers the full tear-out and rebuild - old shower out, new waterproofed assembly in, and a working shower at the end. You don't coordinate a plumber, a tiler, and a glass guy; we handle all three. Here's what's in the standard scope, and what we quote separately if you want it added.
New Shower Pan And Liner
A pre-sloped base with a proper shower pan liner goes in, sealed to the drain flange. This is the layer that keeps water out of your subfloor for the next few decades.
Waterproofing And Backer Board
Cement backer board and a waterproofing membrane from Schluter Systems or Laticrete cover every wall and seam. We tape and seal the corners before any tile goes up.
New Shower Valve And Trim
A licensed plumber replaces the shower valve and installs new trim from Moen, Delta, or Kohler. You pick the finish; we make sure it's pressure-balanced and code-correct.
Tile, Grout, And Caulking
We set your chosen tile, grout the joints, and seal every change of plane with silicone caulk. Grout and caulk are included in the standard price, not billed as extras.
Final Leak Test And Cleanup
We run the shower for 20 minutes and check every seam before we call the job done. Then we clean up, haul the last of the debris, and walk you through the new setup.
How it works
How Our Walk-In Shower Replacement Process Works
We come out, measure the existing shower, and check the drain location, valve height, and wall framing. You get a written price the same day, not a range that moves later. Most estimates take 30 to 45 minutes.
We lay drop cloths, shut off the water, and pull the old shower door, tile, backer board, and pan. A pipe wrench and drain wrench get the old drain out clean. Tear-out on a standard 32x60 shower takes four to six hours, and we haul everything away.
A licensed plumber replaces the shower valve and reworks the drain to match the new base. We set the shower pan liner, pour or set the pre-sloped base, then hang cement backer board and roll on a waterproofing membrane. This is the step that keeps the next 30 years dry.
We set tile with a notched trowel and thinset mortar, then grout and seal. A tile saw and wet saw handle the cuts around the niche and valve. Glass door and enclosure install comes next, followed by grab bars or a shower seat if you ordered them.
We run the shower for 20 minutes and check every seam for leaks. You get a walkthrough of the new valve, drain, and caulking, plus a short list of what to keep an eye on. Most jobs wrap in two to four working days.
STEP 01On-Site Measure
We come out, measure the existing shower, and check the drain location, valve height, and wall framing. You get a written price the same day, not a range that moves later. Most estimates take 30 to 45 minutes.
Tools & methods
Tools And Methods We Use
Wet saw and tile saw
Precision cuts on porcelain, ceramic, and natural stone tile, including the angles around niches and valve trim.
Notched trowel and grout float
Spreads thinset mortar at the correct depth for full tile coverage, then packs grout into the joints evenly.
Pipe wrench and drain wrench
Removes the old shower drain and valve connections without damaging the surrounding pipe or flange.
Caulking gun
Applies silicone caulk at every change of plane - corners, curb, and glass - where grout alone would crack.
Level and measuring tape
Sets the pre-sloped base and checks that the walls are plumb before backer board goes up.
Drill and screwdriver set
Fastens backer board, blocking for grab bars, and the shower door frame into framing, not just tile.
Real results
Before and after.
Walk-In Shower Replacement
Cracked Pan Rebuild In Highland
A 1978 shower with a cracked pan and a water stain spreading on the kitchen ceiling below. The original valve was still in the wall, and the tile had popped loose in two corners from years of moisture behind it.
After: Full tear-out, new subfloor section, pre-sloped base with a new liner, and a pressure-balanced valve. New porcelain tile and a frameless glass door. The ceiling stain stopped spreading within a week.
Book this service →
Walk-In Shower Replacement
Tub-To-Shower Conversion In Alameda
A standard 60-inch tub-shower combo that was hard for the homeowner's father to step into. The tub surround was original 1960s tile with failing grout and a slow drain.
After: Tub removed, drain reworked, and a low-threshold walk-in shower built in the same footprint. Grab bar blocking installed in the walls, fold-down seat, handheld showerhead on a slide bar. Job took four days.
Book this service →
Walk-In Shower Replacement
Rental Shower Rebuild Near University Area
A rental shower that had been re-caulked three times in five years and still leaked into the unit below. Grout lines were black with mildew and the pan flexed when you stepped in.
After: Full tear-out and rebuild with acrylic shower panels over a waterproofed substrate. New valve, new drain, new glass door. No grout lines to fail, and the leak complaint stopped.
Book this service → Problems we solve
Shower Problems We Fix With A Full Replacement
Some shower problems are worth repairing. Others mean the shower has reached the end of its life and a replacement is the cheaper long-term call. Here's how we tell the difference, and what we do about each one.
Ask a pro →Cracked shower pan leaking into the floor
We tear out the failed pan, inspect the subfloor, replace any soft wood, and set a new pre-sloped base with a fresh shower pan liner. The drain flange gets re-sealed and tested before the new tile goes on.
Mold and mildew that keeps coming back
We strip the shower to the studs, treat any surface mold, and rebuild with cement backer board and a waterproofing membrane. New silicone caulk at every seam means there's nowhere for moisture to sit.
Shower door not closing and water on the floor
We check the frame, rollers, and hinges. If the enclosure is salvageable we repair it. If the frame is bent or the glass is chipped, we install a new glass door and enclosure from DreamLine, Vigo, or Sterling and adjust it so the sweep seals properly.
Low water pressure and cold showers
We replace the shower valve with a pressure-balanced unit and install a new cartridge and trim. While the wall is open, we check the supply lines and clear any scale or debris from the line.
Transparent pricing
Walk-In Shower Replacement Cost In Pocatello
$4,200 - $9,800 depending on size, materials, and scope
Typical 2026 pricing for a walk-in shower replacement in Pocatello runs $4,200 to $9,800 depending on size, tile choice, and whether we're moving the drain or valve. A simple pan-and-tile swap sits at the low end. A full rebuild with a new valve, custom tile, a bench, and a frameless glass door sits at the high end. We give you a firm written price the same day we measure, and we don't add line items after tear-out unless we find something you approve first.
A shower replacement done right lasts 25 to 30 years. Done cheap - no pre-slope, no membrane, green board instead of backer board - it fails in five and takes your subfloor with it. The waterproofing is the part you're really paying for.
•affects cost
A standard 32x60 shower costs less than a 48x60 or a custom-tiled walk-in. Odd shapes and corner entries take more tile cuts and more time, which moves the price up.
Get a quote ↗•affects cost
Acrylic shower panels cost less and install faster than tile. Porcelain or natural stone tile costs more in material and labor, but gives you a wider range of looks and a longer service life.
Get a quote ↗•affects cost
Replacing the valve in the same spot is straightforward. Moving the drain or relocating the valve means reworking the plumbing and the subfloor, which adds a day and a few hundred dollars.
Get a quote ↗•affects cost
A framed sliding door is the budget option. A frameless glass door or a custom enclosure costs more in material and installation, but it opens up the bathroom visually.
Get a quote ↗ Proof you can check
Licensed, Insured, And Local
- State-Licensed Plumbing Contractor · Idaho Division of Occupational and Professional Licenses
- Licensed General Contractor · City of Pocatello Building Department
- Schluter Systems Certified Installer · Schluter Systems
- Laticrete Installation Certification · Laticrete International
- EPA WaterSense Partner · U.S. Environmental Protection Agency
Most walk-in shower replacements in Pocatello run $4,200 to $9,800 in 2026, depending on size, tile choice, and whether we're moving the drain or valve. A simple pan-and-tile swap sits at the low end. A full rebuild with a new valve, custom tile, and a frameless glass door sits at the high end. We give you a firm written number after the on-site measure.
Plan on two to four working days for a standard 32x60 shower. Tear-out and rough-in take a day, waterproofing and tile take one to two days, and grout, glass, and final test take the last day. Custom tile patterns or a drain relocation can push it to five or six days. We tell you the schedule up front and stick to it.
Yes, if the job involves moving or replacing the shower valve, drain, or supply lines. The City of Pocatello requires a plumbing permit for that work, and we pull it for you. A cosmetic swap that reuses the existing drain and valve usually doesn't need one. We'll tell you which category your job falls into during the estimate.
We do - ShowerPro Installation, a licensed local crew working out of Pocatello and serving all of Bannock County. We handle tear-out, plumbing, waterproofing, tile, and glass in one job, so you're not juggling three contractors. Call us at +1 986-336-9120 for a same-day estimate.
Ready when you are
Get Your Walk-In Shower Replacement pocatello ID Quote
We give firm written pricing the same day we measure, and we don't upsell you into work you don't need. Call ShowerPro Installation at +1 986-336-9120 and we'll get you on the schedule.
Get Free Estimate +19863369120 →
Request an appointment
get your free shower estimate
Call us at +1 986-336-9120 or email info@showerproinstallation.com and we'll set up a free on-site measure. We answer the phone Monday through Friday, 8:00 to 18:00, and we return every message the same business day. For a leaking shower or a valve that's spraying, call any time - we run emergency call-outs 24/7.
Call anytime+19863369120Email the officeinfo@walkinshowerinstallationpocatelloid.com
Office hoursOpen 24 hours · 7 days a week